Ever worry your ambitious house plans might end up down the tubes? Well here the architect looked at things another way – designing a guest house out of commercial drainage elements

Designed by Nendo

From the architect:

The project is a storage facility for archiving furniture, products, and artwork, with a guesthouse attached. 

Located in a quiet and nature-rich environment in the central Chūbu region of Japan where streams weave through a thick forest of red pine, the tunnel-like architecture took shape through a combination of precast and prestressed construction methods.

For precast construction, common parts are moulded in a factory and assembled on site. 

An example of its applications in infrastructure projects is the box culvert (box-shaped concrete structures), used to store waterways, pathways, power lines, and communication lines buried underground. 

However, since the method itself does not provide a leak-free composition nor does it allow for stacking, both necessary for this architecture, prestressing was also used to connect the parts together.

The prestressing method is a technique used in civil engineering structures such as bridges, in which the parts are aligned and then tightened with wires to connect them. 

This results in a seamless and smooth surface finish, obtaining a tight seal, and durability.

The common square-shaped parts weigh approximately 12 tons each, and a total of 63 of these parts were used. 

The size of the parts was derived from the loading size of the delivery truck and the weight that could be lifted by a crane. 

The 45-degree reinforcement at the entry corner, which is also found in general box culverts, serves as a brace and enhances earthquake resistance. 

By connecting these parts, a slender, tunnel-shaped space with an internal dimension of approximately 2 x 2.3 m was created. 

Fourteen wires were used to connect each “tunnel” and care was taken to apply uniform tension to each wire at all times. 

The work involved gradually tightening the wires over time until a tension of 46 tons was finally applied to each.

The building is composed of four stacked “tunnels” covered with a roof in the centre. 

In addition to a long, narrow storage room with a depth of approximately 40m, there are two smaller storage rooms, but it is envisioned that more will be added to the site in the future as the collection grows. 

The kitchen, bathroom, toilet, and other water facilities are concentrated on the first floor, and a compact bedroom and a study are located on the second floor.

The windows were made without metal frames as much as possible, and high-transparency glass measuring up to 10m in length was fixed into the grooves in the same manner as shoji screens. 

The gravel and plantings used in the exterior were also arranged from the perspective of the interior to draw the outside environment into the interior. 

To make it easier to walk on, the gravel was partially hardened with resin. 

Instead of just pouring resin over the gravel, which is usually the case, the resin was applied to the base first and then gravel was laid on it so that the surface wouldn’t become glossy. 

In addition, the door handles would have looked abrupt if installed as-is, so an original handle was designed, which hides in the small gap between the door and the wall. 

The bathtub is carved into the floor, such that the water surface aligns with the floor, creating the appearance that the tunnel shape is continuous.

The resulting space is less architectural, but rather a project that combines civil engineering concepts with product design details.

Explore the culvert-constructed guest house

Credit list

Niitsu-Gumip. S. – Mitsubishi Construction
Noritaka Ishibayash; iRyota Maruyama; Daisuke Maeda

Designed by: Nendo

Story by: Trendsideas

Photography by: Daici Ano and Takumi Ota

16 Oct, 2022

Home kitchen bathroom commercial design

We know the Specialists

Similar Stories