Facebook

Tweet

Help

Designed by Zaha Hadid Architects, the Striatus footbridge is the first of its kind, combining traditional and robotic manufacturing technologies


Load-bearing concrete structures that require significantly less material and no steel reinforcement or mortar can now be built using 3D printing. 

ETH architects and engineers from the Block Research Group in collaboration with Zaha Hadid Architects and other industry partners have demonstrated how this works with a footbridge in Venice.

Millions of new buildings all over the world are  constructed with reinforced concrete, even though this type of construction generates large amounts of CO2 emissions. The steel used for the reinforcement and the cement for the concrete are especially problematic in this regard. 

ETH researchers have now presented a way to reduce both steel and concrete, in a real project.

The Block Research Group teamed up with the Computation and Design Group at Zaha Hadid Architects to build a 12-by-16-metre arched footbridge in a park in Venice – entirely without reinforcement.

Using an additive process, the construction dubbed “Striatus” was built with concrete blocks that form an arch much like traditional masonry bridges. This compression-only structure allows the forces to travel to the footings, which are tied together on the ground. The dry-assembled construction is stable due to its geometry only.

Printed in specific angles

What is completely new is the type of 3D-printed concrete, which the researchers developed together with the company Incremental3D. The concrete is not applied horizontally in the usual way but instead at specific angles such that they are orthogonal to the flow of compressive forces. This keeps the printed layers in the blocks nicely pressed together, without the need for reinforcement or post-tensioning. The special concrete ink for the 3D printer was developed by the company Holcim precisely for this purpose.

ETH professor Philippe Block said: “This precise method of 3D concrete printing allows us to combine the principles of traditional vaulted construction with digital concrete fabrication to use material only where it is structurally necessary without producing waste.”

Because the construction does not need mortar, the blocks can be dismantled, and the bridge reassembled again at a different location. If the construction is no longer needed, the materials can simply be separated and recycled.

See more about the innovative processes used in the Striatus bridge design and construction.

Designed by: Zaha Hadid Architects

Story by: Trendsideas

17 Oct, 2021

Home kitchen bathroom commercial design


We know the Specialists

Similar Stories